Description
- ***ADDED OPTIONS***
- MERCURY 250XL DTS
- MERCURY 15ELPT PRO KICKER w/ CONTROLS
- ROAD RUNNER TANDEM AXLE #5200 TRAILER
- DISC BRAKES , LOAD GUIDES , LED LIGHTS
- SINGLE STATION DUAL STATION HYD STEERING
- AWNING ALUM FRAMED CANVAS 36"
- BOW RAILING 10" AT FRONT OPEN ENDED
- BULKHEAD w/ SLIDING DOOR
- SELF BAILING ALUMINUM DECK
- UPGRADED FUEL CAPACITY FROM 180L TO 272L
- DUAL STATION STEERING STATION CONSOLE w/ STORAGE
- LOCKING VENTED STORAGE COMP. UNDER REAR CONSOLE
- FISH BOX LINER IN UNDER DECK FLOOR STORAGE
- OVER HEAD GRAB HANDLES
- LADDER-FOLDING SWIM LADDER w/ GRAB HANDLE
- NET HOLDER STBD GUNNEL
- RADAR POST w/ ANTENNA WINGS
- ROD HOLDERS 2 X 3
- SIDE STEPS FIXED TO ROD TRAYS
- TRANSOM EXIT DOOR
- TRANSOM HANDRAILS w/ DOWNRIGGER MOUNTS
- V-BERTH DOOR
- 2 ARM RESTS PER SEAT
- FOOT REST UPGRADE TO BULKHEAD MOUNT
- CABIN VENT
- DASH MAT ANTI SLIP
- VELOUR HEADLINER IN CABIN
- MARINE HEAD - MANUAL w/ THRU HULL SHUT OFF
- 12V POWER SOCKET w/ USB PORT
- 8-WAY FUSED SWITCH PANEL ON DASHBOARD
- BATTERY UPGRADE TO AGM
- COCKPIT LIGHT
- TRANSOM LIGHT
- DOCKING LIGHTS
- LOW LEVEL PASSAGE WAY LIGHTS
- FIRE EXTINGUISHER
- SCOTTY D/R RECEPTACLES
- HEAVY DUTY ALUM FRAMED BULKHEAD WINDOWS
- COMPASS
- STEREO - 200W BLUETOOTH
- GARMIN 943xsv w/ TRANSDUCER
- GARMIN VHF 115
- WHITE POLYURETHANE w/ CLEAR COAT CABIN INTERIOR , EXTERIOR & SIDES
- DECK WASHDOWN PUMP
- STAINLESS STEEL PROPELLER
***STANDARD FEATURES***
1 x Fully welded hard-top, 2-piece aft leaning windshield, & (2) sliding side windows with flyscreens (all windows are aluminum-framed)
- 1 x Cuddy compartment with V-berth: Fully insulated, framed and paneled bunk, 3″ vinyl-upholstered cushions, (1) light (red & white dome-style), (1) emergency escape hatch with fly screen, and (2) cuddy side windows
- 1 x 12 V power socket with USB port & LED light
- 1 x 6-way fused switch panel on dashboard
- 5 x 9″ welded aluminum cleats
- 1 x Battery – dual SRM 24 batteries including wiring, breaker, 4-way selector switch & boxes
- 1 x Bilge pump – 1600 GPH bilge pump – automatic on/off
- 1 x Bow railing – low profile
- 1 x Brackets for transducer & sacrificial anode
- 1 x Cabin light (interior)
- 1 x Chain locker – self draining with heavy duty stainless steel anchor roller. Insulated for noise reduction
- 1 x Chines & gunnels fully welded
- 2 x Coat hooks welded in cabin to cabin sides (dual hook)
- 4 x Cup holders
- 1 x Closing storage in transom (locking battery compartment)
- 2 x Downrigger brackets pad mounts (welded)
- 3 x Drain plugs
- 1 x Electric trim tab set (12″L x 12″W)
- 2 x Electric wipers – heavy duty wipers with self-park & switch
- 1 x External motor bracket for single 25″ engine with auxiliary mount & full width transom platform
- 1 x Fish box in rear gunnel with cutting board
- 1 x Flotation – closed cell polyurethane spray foam under decks & gunnels
- 2 x Foot rests on forward bulkhead (folding)
- 1 x Fuel tank (45 Imp Gal/205 L/54 US Gal) w/ fuel gauge – built in under deck
- 1 x Fully welded (non self-bailing) aluminum cockpit deck with inspection hatches for fuel connections & wire ways
- 1 x Glove box
- 1 x Handrails – cabin top
- 1 x Heavy duty custom hull graphic
- 1 x Horn – twin compact (stainless steel)
- 1 x Keel guard on hull bottom (beaching wear strip)
- 1 x Navigation lights (LED)
- 1 x Non-skid paint on bow & main deck
- 1 x Non-skid paint on gunnels
- 1 x Passenger grab rail
- 1 x Raised foredeck (bow) for increased head clearance in cuddy compartment
- 1 x Side stiffener (per side)
- 1 x Side storage trays – full length
- 1 x Steering for single engine, single station – hydraulic
- 2 x Storage bench seat (vented) with step down for pedestal, backrest and vinyl upholstery (52″ x 18″ x 18″)
- 1 x Storage compartments in V-berth
- 1 x Under deck storage compartment in cockpit deck
- 2 x Swivel seats – Barry Marine vinyl upholstered (MED) on shock absorbing Back Saver pedestals w/ seat slide
- 3 x Welded bow & transom eyes with stainless steel inserts
